Sometimes it is not just what you are celebrating, but how you mark the moment. This guide shows you how to bedazzle a champagne bottle with premium Swarovski non-hotfix crystals, turning an already special bottle into a standout centrepiece. It catches the light beautifully, making it perfect for weddings, milestone birthdays and anniversaries, or as a luxurious, truly personal gift.
It is an easy, beginner-friendly project, and simple to personalise with your own colours and design. Here is everything you need, then the full method.
Project at a glance
- Difficulty: Intermediate
- Time: A couple of hours, plus at least 12 hours to cure
- Crystals used: Swarovski flatbacks in an ombre of Rose Peach, Indian Pink and Silk, sizes SS3 to SS16
- Best crystal type: Non-hotfix flatbacks, glue-set to the glass
Watch the tutorial
See this project come together. Watch the full make below, then scroll down for the kit list and step-by-step instructions.
What you'll need
Quantities suit a full ombre design on a standard bottle, so scale them to your design. Add the crystals, glue and tools to your cart from the cards below. The picker and tray are reusable across every project, so browse the full range of tools and accessories to build your kit.
- Champagne bottle (your own)Your base, see note below1
- Swarovski Non-Hotfix Flatbacks SS16, Rose PeachOmbre, body100
- Swarovski Non-Hotfix Flatbacks SS12, Rose PeachOmbre, body250
- Swarovski Non-Hotfix Flatbacks SS9, Rose PeachOmbre, blending200
- Swarovski Non-Hotfix Flatbacks SS7, Rose PeachOmbre, blending50
- Swarovski Non-Hotfix Flatbacks SS3, Rose PeachFine detail50
- Swarovski Non-Hotfix Flatbacks SS5, Indian PinkOmbre accent100
- Swarovski Non-Hotfix Flatbacks SS3, Indian PinkOmbre accent100
- Swarovski Non-Hotfix Flatbacks SS12, SilkOmbre highlight100
- E6000 Glue KitAdhesive with syringe1
- Wax Crystal Picker PenPlacing crystals1
- Magic Sorting TrayOrganising sizes1
Shop this project
Everything you need for this build. Quantities are a guide, so adjust to your design.
From £2.23 Excl. VAT
From £2.23 Excl. VAT
£9.53 Excl. VAT
£1.95 Excl. VAT
£5.12 Excl. VAT
Not sure how many crystals you need? Use our Crystal Calculator to estimate by surface area.
How to bedazzle a champagne bottle
Step 1: Gather your supplies
Tip your flatbacks into the sorting tray so they are easy to reach. Make sure the tip of your wax picker is sharp, which makes lifting each crystal easier, then load your E6000 glue into the syringe.
Step 2: Map out your design
Before gluing, plan your placement, which matters most around lettering and smaller areas. You can follow the bottle's own label design or create your own, and on glass you can use a positioner or wax pencil to draw the design out first.
Step 3: Place the crystals
Apply the glue a little at a time, using just enough to hold each stone, as too much looks messy. Because glass is smooth, leave the glue to go tacky for around five to ten minutes before placing the crystals, so they do not slip during application. Lift each crystal into place with the wax picker.
Step 4: Inspect and adjust
Once everything is placed, check your work, and add, remove or straighten any crystals that are out of line or not sitting flat against the bottle before the glue sets.
Step 5: Leave to cure
Leave the bottle to cure for at least 12 hours so the bond is fully set before you display or gift it.
Where to buy genuine Swarovski crystals
As an Authorised Swarovski Distribution Partner, Bluestreak Crystals supplies the complete genuine range of Swarovski flatbacks, sourced directly from Austria with consistent batch quality, reliable colour matching and full lead-free compliance, so your champagne bottle sparkles with authentic brilliance.
Frequently asked questions
How do you bedazzle a champagne bottle?
Clean the glass, plan or draw your design, then glue flatback crystals on one at a time with a strong adhesive. Because glass is smooth, let the glue go tacky before placing each stone, work in sections around the curve, and leave it to cure fully before displaying.
What glue works best on a glass bottle?
A flexible, industrial-strength adhesive such as E6000. On glass it helps to apply the glue and then wait around five to ten minutes for it to become tacky before pressing on each crystal, which stops them sliding on the smooth, curved surface.
How do you apply crystals neatly to a curved bottle?
Map your design first, and on glass you can use a positioner or wax pencil to draw it out before you start. Work in small sections, use larger crystals on the body and smaller sizes around the neck and curves, and follow the bottle's lines for an even finish.
How many crystals do I need for a champagne bottle?
It depends on how much you cover. A full ombre design like this uses several hundred flatbacks across a range of sizes. Use our Crystal Calculator to estimate by area before you buy, so you order enough in one batch for consistent colour.
Can you still open a bedazzled champagne bottle?
Treat it as a keepsake or gift. If you do plan to open it, keep the crystals well clear of the foil, cage and cork at the top, and never place crystals where someone would drink from. Most embellished bottles are kept as a display piece or opened carefully.
Which crystals and colours should I use?
Any flatback colours work; we used an ombre of Rose Peach, Indian Pink and Silk for a soft, romantic blend. We used premium Swarovski here, and you can also use Czech-made Preciosa, our own Austrian-made Serinity, or budget Estella in your chosen shades.
Make it your own
Try a single colour, a monogram, or a different ombre to match the occasion. For a matching celebration set, see our crystal wedding glasses project, or our embellished prosecco bottle for a different bottle. You can also explore the full Craft Studio.
