If you're looking for the perfect wedding gift for a newly married couple, why not consider Wedding Glasses embellished with Swarovski Rhinestones? These gorgeous champagne glasses are the perfect addition to any bridal toast – adding just the right touch of glamour and elegance to the big day.
Attractive and Stylish, champagne glasses adorned with Swarovski Rhinestones are a perfect blend of elegance and style. Each glass glistening with stunning rhinestone embellishments, adding just the right amount of sparkle to the proceedings.
The crystal-clear glass paired with the dazzling rhinestones, make the glasses a perfect accessory for a variety of wedding themes such as vintage, modern or glamorous. They are ideal for outdoor weddings, beach weddings, summer weddings, autumn weddings or winter weddings.
For this project we have selected the traditional Mr & Mrs design and combined it with a classic cupid’s arrow and heart motif, however this is simply one option of many. We encourage you to customise the pronouns and the decorative motifs, to best suit the happy couple receiving this gift. It’s an opportunity to show them how much you know about them, and it will ensure your gift stands out from the crowd!
Component List:
The full list of rhinestones, components and tools needed to complete this project can be found below. If you click on the product description (link), the respective product page will open, where each item can be viewed and added to cart:
| Component | Component Name / Link | Quantity |
|
x 1 | |
 |
E6000 Plus Glue Kit | x 1 |
 |
Wax Crystal Picker Tool | x 1 |
|
Magic Sorting Tray | x 1 |
 |
Champagne Flutes | x 2 |
Instructions
Step 1
Clean the champagne glasses
Ensure that the champagne flutes are completely clean and ready for gluing.
Step 2
Prepare the glue
Fill the Crystal FX Glue Syringe with enough E6000 Plus Resin Glue for your project, be careful to not take more glue than you need. The easiest way to do this is to place the end of the syringe inside the nozzle of the E6000 Plus glue tube and pull the plunger on the syringe while gently squeezing the tube of glue. This will transfer the glue from the tube to the syringe with minimal mess and exposure to the air.
Step 3
Guard against air bubbles in the glue syringe
Once the glue is transferred you are likely to have a small air bubble in the syringe, hold the syringe vertically so that the bubble floats to the opening at top and gently push on the stopper, pushing the air out until there is only glue left inside. You can then attach the needle tip, completing the syringe.
Step 4
Give yourself a guide for your design
For ease we recommend printing out your chosen design onto some paper and slotting it inside the flute of the glass to act as a guide.
Step 5
Apply the glue
Use the loaded syringe to squeeze out a thin layer of glue onto the glass, drawing out your chosen design and leave it for 5 to 10 minutes to get tacky. Be careful to not apply too much, otherwise you will risk the glue running in unwanted directions. We also advise doing this stage in small sections when working on three dimensional objects to minimise the risk of accidentally touching the glue while it’s still wet.
Step 6
Place the rhinestones
Use the Double Ended Wax Picker Pen to gently place the Swarovski Rhinestones onto the glue. Be sure to make full use of the different sizes and flex up and down in rhinestone size to best match the width of the brush stroke in the lettering. Try to keep the crystals close together with as few gaps as possible for best effect.
STEP 7
Tidy up and finish
Tidy up the edges with Isopropyl alcohol if needed and let it dry overnight, once the glue is safely dry you can remove the guide paper from inside the glass.
