Step into the sunnier months with a personalised accessory - bespoke embellished sunglasses, finished with the sparkle of Estella crystals. This step-by-step guide will show you how to transform a simple pair of sunglasses into something stylish, sophisticated, and entirely your own.
Whether you opt for subtle shimmer or a bolder, more intricate design, the choice is yours. Select from an extensive range of crystal colours, from soft neutrals and pastels, to bright colours, these sunglasses can fit your personal style perfectly. Ideal for special occasions, holiday wear, or simply adding a touch of brilliance to everyday outfits, embellished sunglasses promise to become a distinctive part of your summer wardrobe.
Component List:
The full list of crystals, components and tools needed to complete this project can be found below. If you click on the product description (link), the respective product page will open, where each item can be viewed and added to cart:
|
Component
|
Component Name / Link
|
Quantity
|
 |
x 1
|
|
|
|
x 1
|
|
|
|
x 1
|
|
 |
x 1
|
|
 |
E6000 Plus Glue Kit |
x 1
|
 |
x 3
|
Instructions:
Step 1
Gather your supplies
Lay out all of your materials and wipe down the sunglasses with a damp cloth and isopropyl to remove any dirt or dust.
Transfer a small amount of E6000+ glue into the syringe for better control. Be sure not to overfill the syringe to avoid air bubbles. If you notice any, gently squeeze out the air bubbles and some glue before proceeding.
Step 2
Planning your design
Decide where you want to place your rhinestones. You can either find inspiration online, or make it up as you go along.
Step 3
Applying the glue
Work in small sections to prevent the glue from drying too quickly. Apply a thin layer of glue directly where you want to place your crystals, and be sure to not use too much as it can spill out the side of the crystals.
Step 4
Place your rhinestones
Use the Wax Picker Pen to carefully pick up and place your flat back crystals onto the sunglasses.
Step 5
Letting them dry
Once all the crystals are in place, allow the glue to dry overnight. Avoid touching or moving the sunglasses during this time to ensure a strong bond.
Step 6
Final touches
Inspect the sunglasses for any gaps or misplaced crystals. If needed, use isopropyl alcohol and a cotton swab to clean any excess glue and stickiness.
Congratulations you have completed the project!
You’ve now customised your very own pair of sunglasses that will be sure to turn heads in the summer months. Get ready to sparkle this Summer!
